Battery Charger

Product Details:

We are engaged in providing of a varied assortment of SMPS Battery Charger, designed to accept wide input voltage range and delivering ripple free DC output in supremely cost efficient manner. Fabricated using highest quality raw materials, these low maintenance and quickly rechargeable chargers are immensely durable and reliable. These are suitable for gen-set as well as on the mains supply.

Features:

• Quick charging
• Long service life
• Easy to use

Product Details:

Substation Batter Chargers are widely used in various industries and educational Institutes. The output voltage produced by our DC power supply ranges from 0 to 1000 V and output current ranges from 0 to 100 Amp. Our power supply is provided with Digital Panel Meters for voltage and current. Additionally, equipped with power supply overload and short circuit protection.

Features:

• Short circuit protection
• Power supply overload
• Low on maintenance

• Gsa Industries Fcbc/Industrial/Substation are designed to supply continuous power to the DC load and simultaneously charge the batteries connected
• Input supply form 415 V. AC 3 Phase or 220 V. AC 1 Ph. is converted to regulated DC
• The charger has two independent systems
• Normally the DC power is supplied to he load by the Float Charger
• It also supplies trickle current to the battery to keep it healthy
• If the charging current under Float Mode exceeds a set level, Boost charger is switched ON
• It supplies Quick charging current to the battery
• On battery reaching the set value, the Boost Charger is switched OFF
• Optional Features like Voltage and current variable

• Float/ Boost chargers are must in Power Substations, Generating Stations, Telephone Exchanges etc. for control / monitoring systems, tripping circuits and suppling DC power source

• Aux: 415V. AC ( 3 Phase) / 240 V (1 Phase) +/- 20 %/ +/- 10%, 50 Hz. +/- 3 Hz
• Indications: Indication for Mains supply, Float Charging, Boost Charging, AC Volt meter optional, DC Volt meter, DC Fail, AC Fail alarm, DC Amps meter for load optional, DC Amps meter for Charging
• Protection: Circuit Breaker for Mains incoming supply, Circuit Breaker for out put load, Over load Protection, AC short circuit protection, Battery reverse Polarity, Low & high voltage Protection
• Housing and enclosure: Heavy duty Sheet Steel Enclosure, Finished with Powder Coated paint
• Mounting: Floor mounting
• Operation: Auto/Manual
• Rectifier: Full wave half controlled bridge
• Optional: Fuse protection for each rectifier element, Fuse failure relay, DC Earth Fault Relay, Alarm Annunciation, Dual Float Charger option, Any other as per requirement

Product Details:

With thorough industrial knowledge, our organization is involved in the providing of a wide range of FCBC Battery Charger. All our products are developed under the strict supervision of quality controllers to eliminate the scope of defect from them. To meet the specific demands of the high range of machinery and industries, we offer our range with a soft start, phase prevents, current control automatic charge, manual charge with programmable timers and manual timers.

Features:

• Rapid charging
• Soft start
• Manual/automatic charging

• Gsa Industries Fcbc/Industrial/Substation are designed to supply continuous power to the DC load and simultaneously charge the batteries connected
• Input supply form 415 V. AC 3 Phase or 220 V. AC 1 Ph. is converted to regulated DC
• The charger has two independent systems
• Normally the DC power is supplied to he load by the Float Charger
• It also supplies trickle current to the battery to keep it healthy
• If the charging current under Float Mode exceeds a set level, Boost charger is switched ON
• It supplies Quick charging current to the battery
• On battery reaching the set value, the Boost Charger is switched OFF
• Optional Features like Voltage and current variable

• Float/ Boost chargers are must in Power Substations, Generating Stations, Telephone Exchanges etc. for control / monitoring systems, tripping circuits and suppling DC power source

• Aux: 415V. AC ( 3 Phase) / 240 V (1 Phase) +/- 20 %/ +/- 10%, 50 Hz. +/- 3 Hz
• Indications: Indication for Mains supply, Float Charging, Boost Charging, AC Volt meter optional, DC Volt meter, DC Fail, AC Fail alarm, DC Amps meter for load optional, DC Amps meter for Charging
• Protection: Circuit Breaker for Mains incoming supply, Circuit Breaker for out put load, Over load Protection, AC short circuit protection, Battery reverse Polarity, Low & high voltage Protection
• Housing and enclosure: Heavy duty Sheet Steel Enclosure, Finished with Powder Coated paint
• Mounting: Floor mounting
• Control: CC/ CV close loop
• Rectifier: Full wave half controlled bridge
• Optional: Fuse protection for each rectifier element, Fuse failure relay, DC Earth Fault Relay, Alarm Annunciation, Dual Float Charger option, Any other as per requirement

Product Details:

We are a prominent name, which is engaged in delivering a superior range of Industrial Battery Charger. The offered range is manufactured utilizing high grade raw material and innovative machinery in strict adherence with the industry laid norms and standards. Along with this, the offered range is tested on different parameters to ensure that defect free products are delivered at clients' premises.

Features:

• Highly portable
• Charges very quickly
• Easy to operate

• Gsa Industries Fcbc/Industrial/Substation are designed to supply continuous power to the DC load and simultaneously charge the batteries connected
• Input supply form 415 V. AC 3 Phase or 220 V. AC 1 Ph. is converted to regulated DC
• The charger has two independent systems
• Normally the DC power is supplied to he load by the Float Charger
• It also supplies trickle current to the battery to keep it healthy
• If the charging current under Float Mode exceeds a set level, Boost charger is switched ON
• It supplies Quick charging current to the battery
• On battery reaching the set value, the Boost Charger is switched OFF
• Optional Features like Voltage and current variable

• Float/ Boost chargers are must in Power Substations, Generating Stations, Telephone Exchanges etc. for control / monitoring systems, tripping circuits and suppling DC power source

• Aux: 415V. AC ( 3 Phase) / 240 V (1 Phase) +/- 20 %/ +/- 10%, 50 Hz. +/- 3 Hz
• Indications: Indication for Mains supply, Float Charging, Boost Charging, AC Volt meter optional, DC Volt meter, DC Fail, AC Fail alarm, DC Amps meter for load optional, DC Amps meter for Charging
• Protection: Circuit Breaker for Mains incoming supply, Circuit Breaker for out put load, Over load Protection, AC short circuit protection, Battery reverse Polarity, Low & high voltage Protection
• Housing and enclosure: Heavy duty Sheet Steel Enclosure, Finished with Powder Coated paint
• Mounting: Floor mounting
• Control: CC/ CV close loop
• Rectifier: Full wave half controlled bridge
• Optional: Fuse protection for each rectifier element, Fuse failure relay, DC Earth Fault Relay, Alarm Annunciation, Dual Float Charger option, Any other as per requirement

Product Details:

The best quality of Float Cum Boost Battery Charger is offered by us. These are extensively used in various suitable applications like to put energy into a secondary cell or rechargeable battery by forcing an electric current through it. Further, these products are highly effective in nature and easy to use. These are made available to the customer at industry leading rates.

Features:

• Very effective
• Simple to use
• Long service life

• Gsa Industries Fcbc/Industrial/Substation are designed to supply continuous power to the DC load and simultaneously charge the batteries connected
• Input supply form 415 V. AC 3 Phase or 220 V. AC 1 Ph. is converted to regulated DC
• The charger has two independent systems
• Normally the DC power is supplied to he load by the Float Charger
• It also supplies trickle current to the battery to keep it healthy
• If the charging current under Float Mode exceeds a set level, Boost charger is switched ON
• It supplies Quick charging current to the battery
• On battery reaching the set value, the Boost Charger is switched OFF
• Optional Features like Voltage and current variable

• Float/ Boost chargers are must in Power Substations, Generating Stations, Telephone Exchanges etc. for control / monitoring systems, tripping circuits and suppling DC power source

• Aux: 415V. AC ( 3 Phase) / 240 V (1 Phase) +/- 20 %/ +/- 10%, 50 Hz. +/- 3 Hz
• Indications: Indication for Mains supply, Float Charging, Boost Charging, AC Volt meter optional, DC Volt meter, DC Fail, AC Fail alarm, DC Amps meter for load optional, DC Amps meter for Charging
• Protection: Circuit Breaker for Mains incoming supply, Circuit Breaker for out put load, Over load Protection, AC short circuit protection, Battery reverse Polarity, Low & high voltage Protection
• Housing and enclosure: Heavy duty Sheet Steel Enclosure, Finished with Powder Coated paint
• Mounting: Floor mounting
• Control: CC/ CV close loop
• Rectifier: Full wave half controlled bridge
• Optional: Fuse protection for each rectifier element, Fuse failure relay, DC Earth Fault Relay, Alarm Annunciation, Dual Float Charger option, Any other as per requirement

Product Details:

We make available VCB Battery Charger. The Instrument is designed to constant output and has solids state circuit. Our offered battery charger is provided with short circuit protection and reverse polarity protection. The offered charger is built in a nicely finished metal box with Indicator, and meter. Our offered charger is specified at 563 Input 230 volts A.C. Output 12 volts D.C. at 3 Amperes.

Features:

• Quickly enforced electric current passage in the battery
• Optimal charging performance
• Ensures longer battery life

• Gsa Industries Fcbc/Industrial/Substation are designed to supply continuous power to the DC load and simultaneously charge the batteries connected
• Input supply form 415 V. AC 3 Phase or 220 V. AC 1 Ph. is converted to regulated DC
• The charger has two independent systems
• Normally the DC power is supplied to he load by the Float Charger
• It also supplies trickle current to the battery to keep it healthy
• If the charging current under Float Mode exceeds a set level, Boost charger is switched ON
• It supplies Quick charging current to the battery
• On battery reaching the set value, the Boost Charger is switched OFF
• Optional Features like Voltage and current variable

• Float/ Boost chargers are must in Power Substations, Generating Stations, Telephone Exchanges etc. for control / monitoring systems, tripping circuits and suppling DC power source

• Aux: 415V. AC ( 3 Phase) / 240 V (1 Phase) +/- 20 %/ +/- 10%, 50 Hz. +/- 3 Hz
• Indications: Indication for Mains supply, Float Charging, Boost Charging, AC Volt meter optional, DC Volt meter, DC Fail, AC Fail alarm, DC Amps meter for load optional, DC Amps meter for Charging
• Protection: Circuit Breaker for Mains incoming supply, Circuit Breaker for out put load, Over load Protection, AC short circuit protection, Battery reverse Polarity, Low & high voltage Protection
• Housing and enclosure: Heavy duty Sheet Steel Enclosure, Finished with Powder Coated paint
• Mounting: Floor mounting
• Control: CC/ CV close loop
• Rectifier: Full wave half controlled bridge
• Optional: Fuse protection for each rectifier element, Fuse failure relay, DC Earth Fault Relay, Alarm Annunciation, Dual Float Charger option, Any other as per requirement

Product Details:

We are leading name of 110 VDC Battery Chargers. Our powerful products are used to maintain full charge condition of a variety of industrial battery systems including gel type batteries. The chargers are designed to protect batteries from over voltage and come with LED indicators for power, boost charging and alarm. Our chargers are manufactured to meet high performance standards and are easy to install and use.

Features:

• Highly reliable
• Easy to install
• Durable in nature

• Gsa Industries Fcbc/Industrial/Substation are designed to supply continuous power to the DC load and simultaneously charge the batteries connected
• Input supply form 415 V. AC 3 Phase or 220 V. AC 1 Ph. is converted to regulated DC
• The charger has two independent systems
• Normally the DC power is supplied to he load by the Float Charger
• It also supplies trickle current to the battery to keep it healthy
• If the charging current under Float Mode exceeds a set level, Boost charger is switched ON
• It supplies Quick charging current to the battery
• On battery reaching the set value, the Boost Charger is switched OFF
• Optional Features like Voltage and current variable

• Float/ Boost chargers are must in Power Substations, Generating Stations, Telephone Exchanges etc. for control / monitoring systems, tripping circuits and suppling DC power source

• Aux: 415V. AC ( 3 Phase) / 240 V (1 Phase) +/- 20 %/ +/- 10%, 50 Hz. +/- 3 Hz
• Indications: Indication for Mains supply, Float Charging, Boost Charging, AC Volt meter optional, DC Volt meter, DC Fail, AC Fail alarm, DC Amps meter for load optional, DC Amps meter for Charging
• Protection: Circuit Breaker for Mains incoming supply, Circuit Breaker for out put load, Over load Protection, AC short circuit protection, Battery reverse Polarity, Low & high voltage Protection
• Housing and enclosure: Heavy duty Sheet Steel Enclosure, Finished with Powder Coated paint
• Mounting: Floor mounting
• Control: CC/ CV close loop
• Rectifier: Full wave half controlled bridge
• Optional: Fuse protection for each rectifier element, Fuse failure relay, DC Earth Fault Relay, Alarm Annunciation, Dual Float Charger option, Any other as per requirement

Product Details:

Our company has been dedicatedly providing 220 VDC Battery Charger. Batteries are required to deliver instant power. Unreliable and inferior batteries can result in the loss of data and equipment shutdowns that can cost companies considerable financial losses. Therefore, our charger have been developed by a team dedicated to electrochemical research. These are designed to offer reliable, consistent and low maintenance power for VDC applications.

Features:

• Batteries provided require minimum maintenance
• Reliable performance and back ups
• Freedom from water adding

• Gsa Industries Fcbc/Industrial/Substation are designed to supply continuous power to the DC load and simultaneously charge the batteries connected
• Input supply form 415 V. AC 3 Phase or 220 V. AC 1 Ph. is converted to regulated DC
• The charger has two independent systems
• Normally the DC power is supplied to he load by the Float Charger
• It also supplies trickle current to the battery to keep it healthy
• If the charging current under Float Mode exceeds a set level, Boost charger is switched ON
• It supplies Quick charging current to the battery
• On battery reaching the set value, the Boost Charger is switched OFF
• Optional Features like Voltage and current variable

• Float/ Boost chargers are must in Power Substations, Generating Stations, Telephone Exchanges etc. for control / monitoring systems, tripping circuits and suppling DC power source

• Aux: 415V. AC ( 3 Phase) / 240 V (1 Phase) +/- 20 %/ +/- 10%, 50 Hz. +/- 3 Hz
• Indications: Indication for Mains supply, Float Charging, Boost Charging, AC Volt meter optional, DC Volt meter, DC Fail, AC Fail alarm, DC Amps meter for load optional, DC Amps meter for Charging
• Protection: Circuit Breaker for Mains incoming supply, Circuit Breaker for out put load, Over load Protection, AC short circuit protection, Battery reverse Polarity, Low & high voltage Protection
• Housing and enclosure: Heavy duty Sheet Steel Enclosure, Finished with Powder Coated paint
• Mounting: Floor mounting
• Control: CC/ CV close loop
• Rectifier: Full wave half controlled bridge
• Optional: Fuse protection for each rectifier element, Fuse failure relay, DC Earth Fault Relay, Alarm Annunciation, Dual Float Charger option, Any other as per requirement

Product Details:

We are engaged in providing Industrial Battery Chargers that are provided on the basis of industry standards and norms. These chargers are reliable, economical and offer continuous short circuit, over load and over current protection. We offer standard battery chargers low working temperature and 100 % load burn in test with no minimum load required.

Features:

• Reliable in nature
• Over-load protection
• Over current protection

• Gsa Industries Fcbc/Industrial/Substation are designed to supply continuous power to the DC load and simultaneously charge the batteries connected
• Input supply form 415 V. AC 3 Phase or 220 V. AC 1 Ph. is converted to regulated DC
• The charger has two independent systems
• Normally the DC power is supplied to he load by the Float Charger
• It also supplies trickle current to the battery to keep it healthy
• If the charging current under Float Mode exceeds a set level, Boost charger is switched ON
• It supplies Quick charging current to the battery
• On battery reaching the set value, the Boost Charger is switched OFF
• Optional Features like Voltage and current variable

• Float/ Boost chargers are must in Power Substations, Generating Stations, Telephone Exchanges etc. for control / monitoring systems, tripping circuits and suppling DC power source

• Aux: 415V. AC ( 3 Phase) / 240 V (1 Phase) +/- 20 %/ +/- 10%, 50 Hz. +/- 3 Hz
• Indications: Indication for Mains supply, Float Charging, Boost Charging, AC Volt meter optional, DC Volt meter, DC Fail, AC Fail alarm, DC Amps meter for load optional, DC Amps meter for Charging
• Protection: Circuit Breaker for Mains incoming supply, Circuit Breaker for out put load, Over load Protection, AC short circuit protection, Battery reverse Polarity, Low & high voltage Protection
• Housing and enclosure: Heavy duty Sheet Steel Enclosure, Finished with Powder Coated paint
• Mounting: Floor mounting
• Control: CC/ CV close loop
• Rectifier: Full wave half controlled bridge
• Optional: Fuse protection for each rectifier element, Fuse failure relay, DC Earth Fault Relay, Alarm Annunciation, Dual Float Charger option, Any other as per requirement

Product Details:

Quality being the ultimate aim, we offer wonderful range of Battery Charge Panel that are fabricated with accuracy. Our entire product range has high compressive strength and ensures wide applications. They are dimensionally accurate in nature and are delivered in varied technical grades. These items from our end are quality tested before the final dispatch.

Features:

• Precision-designed
• Supreme quality
• Longer life

• Gsa Industries Fcbc/Industrial/Substation are designed to supply continuous power to the DC load and simultaneously charge the batteries connected
• Input supply form 415 V. AC 3 Phase or 220 V. AC 1 Ph. is converted to regulated DC
• The charger has two independent systems
• Normally the DC power is supplied to he load by the Float Charger
• It also supplies trickle current to the battery to keep it healthy
• If the charging current under Float Mode exceeds a set level, Boost charger is switched ON
• It supplies Quick charging current to the battery
• On battery reaching the set value, the Boost Charger is switched OFF
• Optional Features like Voltage and current variable

• Float/ Boost chargers are must in Power Substations, Generating Stations, Telephone Exchanges etc. for control / monitoring systems, tripping circuits and suppling DC power source

• Aux: 415V. AC ( 3 Phase) / 240 V (1 Phase) +/- 20 %/ +/- 10%, 50 Hz. +/- 3 Hz
• Indications: Indication for Mains supply, Float Charging, Boost Charging, AC Volt meter optional, DC Volt meter, DC Fail, AC Fail alarm, DC Amps meter for load optional, DC Amps meter for Charging
• Protection: Circuit Breaker for Mains incoming supply, Circuit Breaker for out put load, Over load Protection, AC short circuit protection, Battery reverse Polarity, Low & high voltage Protection
• Housing and enclosure: Heavy duty Sheet Steel Enclosure, Finished with Powder Coated paint
• Mounting: Floor mounting
• Operation: Auto/Manual
• Control: CC/ CV close loop
• Rectifier: Full wave half controlled bridge
• Optional: Fuse protection for each rectifier element, Fuse failure relay, DC Earth Fault Relay, Alarm Annunciation, Dual Float Charger option, Any other as per requirement

Product Details:

Automatic Plate Formation Charger Discharger:

· The BITE Constant Current/Constant Voltage Battery Plate Formation Chargers are designed to charge the battery plates specially for plate manufacturing industries to charge them perfectly and thereby ensure trouble - free quality of the battery plates.

· It also incorporate an end voltage set to avoid over charging of the battery plate. Various visual indicators are provided for user convenience.

Available in following ratings:

·       60V/20A

·       110V/30

·       110V/50

·       300V/50A

·       450V/100A

·       450V/200A

·       300V/30A UPTO 450V/200A

Product Details:

We are engaged in offering Battery Charger, which is appreciated by our client for its best quality. We offer these items which effectively charge the battery whenever battery voltage is low auto charge cutoff system provided to protect the battery over charge. These chargers come in different technical specifications and meets the application requirements of varied industries. We offer these products to the consumers at inexpensive prices.

Features:

• Elevated performance
• Easy to operate
• Flexible Design
• Protection - Auto Start /Auto Cut / Fuse Blow / Battery Reverse / Ac Short Circuit / Overload Load Shut Down / P&Pnc

Additional Information:

• Item Code: Code-BT-444

Product Details:

Product Details:

• Gsa Industries Fcbc/Industrial/Substation are designed to supply continuous power to the DC load and simultaneously charge the batteries connected
• Input supply form 415 V. AC 3 Phase or 220 V. AC 1 Ph. is converted to regulated DC
• The charger has two independent systems
• Normally the DC power is supplied to he load by the Float Charger
• It also supplies trickle current to the battery to keep it healthy
• If the charging current under Float Mode exceeds a set level, Boost charger is switched ON
• It supplies Quick charging current to the battery
• On battery reaching the set value, the Boost Charger is switched OFF
• Optional Features like Voltage and current variable

• Float/ Boost chargers are must in Power Substations, Generating Stations, Telephone Exchanges etc. for control / monitoring systems, tripping circuits and suppling DC power source

• Aux: 415V. AC ( 3 Phase) / 240 V (1 Phase) +/- 20 %/ +/- 10%, 50 Hz. +/- 3 Hz
• Indications: Indication for Mains supply, Float Charging, Boost Charging, AC Volt meter optional, DC Volt meter, DC Fail, AC Fail alarm, DC Amps meter for load optional, DC Amps meter for Charging
• Protection: Circuit Breaker for Mains incoming supply, Circuit Breaker for out put load, Over load Protection, AC short circuit protection, Battery reverse Polarity, Low & high voltage Protection
• Housing and enclosure: Heavy duty Sheet Steel Enclosure, Finished with Powder Coated paint
• Mounting: Floor mounting
• Control: CC/ CV close loop
• Rectifier: Full wave half controlled bridge
• Optional: Fuse protection for each rectifier element, Fuse failure relay, DC Earth Fault Relay, Alarm Annunciation, Dual Float Charger option, Any other as per requirement

Product Details: