Manual Charger

Product Details:

We are leading name of Manual Charger. The chargers are designed to protect batteries from over voltage and come with LED indicators for power, boost charging and alarm. Our chargers are manufactured to meet high performance standards and are easy to install and use. Our powerful products are used to maintain full charge condition of a variety of industrial battery systems including gel type batteries.

Features:

• Very reliable
• Simple to install
• Durable in nature

• Gsa Industries Fcbc/Industrial/Substation are designed to supply continuous power to the DC load and simultaneously charge the batteries connected
• Input supply form 415 V. AC 3 Phase or 220 V. AC 1 Ph. is converted to regulated DC
• The charger has two independent systems
• Normally the DC power is supplied to he load by the Float Charger
• It also supplies trickle current to the battery to keep it healthy
• If the charging current under Float Mode exceeds a set level, Boost charger is switched ON
• It supplies Quick charging current to the battery
• On battery reaching the set value, the Boost Charger is switched OFF
• Optional Features like Voltage and current variable

• Float/ Boost chargers are must in Power Substations, Generating Stations, Telephone Exchanges etc. for control / monitoring systems, tripping circuits and suppling DC power source

• Aux: 415V. AC ( 3 Phase) / 240 V (1 Phase) +/- 20 %/ +/- 10%, 50 Hz. +/- 3 Hz
• Indications: Indication for Mains supply, Float Charging, Boost Charging, AC Volt meter optional, DC Volt meter, DC Fail, AC Fail alarm, DC Amps meter for load optional, DC Amps meter for Charging
• Protection: Circuit Breaker for Mains incoming supply, Circuit Breaker for out put load, Over load Protection, AC short circuit protection, Battery reverse Polarity, Low & high voltage Protection
• Housing and enclosure: Heavy duty Sheet Steel Enclosure, Finished with Powder Coated paint
• Mounting: Floor mounting
• Control: CC/ CV close loop
• Rectifier: Full wave half controlled bridge
• Optional: Fuse protection for each rectifier element, Fuse failure relay, DC Earth Fault Relay, Alarm Annunciation, Dual Float Charger option, Any other as per requirement

Additional Information:

• Item Code: BT-888

Product Details:

Manual Battery Charger has three modes, making it easy to charge, maintain or jump start 12 volt batteries. This one has built-in safety features such as reverse polarity alert, thermal protection shutoff and a self-resetting circuit breaker. Copper plated clamps offer superior conductivity. These are made available to the customers at industry leading rates and as per set industry norms.

Features:

• Various modes
• Easy to charge
• Safety features

• Gsa Industries Fcbc/Industrial/Substation are designed to supply continuous power to the DC load and simultaneously charge the batteries connected
• Input supply form 415 V. AC 3 Phase or 220 V. AC 1 Ph. is converted to regulated DC
• The charger has two independent systems
• Normally the DC power is supplied to he load by the Float Charger
• It also supplies trickle current to the battery to keep it healthy
• If the charging current under Float Mode exceeds a set level, Boost charger is switched ON
• It supplies Quick charging current to the battery
• On battery reaching the set value, the Boost Charger is switched OFF
• Optional Features like Voltage and current variable

• Float/ Boost chargers are must in Power Substations, Generating Stations, Telephone Exchanges etc. for control / monitoring systems, tripping circuits and suppling DC power source

• Aux: 415V. AC ( 3 Phase) / 240 V (1 Phase) +/- 20 %/ +/- 10%, 50 Hz. +/- 3 Hz
• Out put: 30 V, 48 V, 110 V and 220 V. DC supply
• Battery Type: Lead Acid / SMF
• Indications: Indication for Mains supply, Float Charging, Boost Charging, AC Volt meter optional, DC Volt meter, DC Fail, AC Fail alarm, DC Amps meter for load optional, DC Amps meter for Charging
• Protection: Circuit Breaker for Mains incoming supply, Circuit Breaker for out put load, Over load Protection, AC short circuit protection, Battery reverse Polarity, Low & high voltage Protection
• Housing and enclosure: Heavy duty Sheet Steel Enclosure, Finished with Powder Coated paint
• Mounting: Floor mounting
• Operation: Auto/Manual
• Control: CC/ CV close loop
• Rectifier: Full wave half controlled bridge
• Optional: Fuse protection for each rectifier element, Fuse failure relay, DC Earth Fault Relay, Alarm Annunciation, Dual Float Charger option, Any other as per requirement